Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

sheld wire grounding issue

Status
Not open for further replies.
R

raman00084

Full Member level 6
Joined
Nov 29, 2010
Messages
362
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
4,006
i am having 20 core shield wire, the shield wire carry data from different sensors. my doubt is that the shielded part of the wire must be connected to earth ground (the center part of 3 pin power socket) or ov (- gnd) of smps.

kindly help


regards
kalyan
 

Hi,
Shield to be connected to the center part of 3 pin power socket. Not on the Return path of the Power Supply (SMPS). If your SMPS is a separate Box, you can connect shield to Body of the SMPS in mating connectors Hood.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top