Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Setting BRGVAL baudrate and FCY for sending data via PIC30F4011 with BT Module ARF32

Status
Not open for further replies.
A

AndersO

Newbie level 2
Joined
Nov 30, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,297
Hi,
We use a dsPICDEM2 card with PIC30F4011 and we want to send data from this card together with a BT Module ARF32 to a computer.
We will like to know for what settings for BRGVAL Baudrate and FCY we need to set to get the right signal. It's very instabel right know we have different value all time.
What are the right settings for this card?

This we have know:
#define FCY 30000000
#define BAUDRATE 115200
#define BRGVAL (FCY/(BAUDRATE*16))-1

Thanks for all help.
BR Anders
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top