Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Sensitivity improve on Slide-phone

Status
Not open for further replies.

xinxin

Full Member level 3
Joined
Oct 8, 2003
Messages
184
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
1,238
I have a slide-phone with inside antenna , but GSM sensitivity is only -90dbm through the radiation , i also found FPC could improve it about 3dB through outside GNDing . Could u help me and give me some adivse or suggestion to hoe to improve it.thanks
 

Didn't there anyone meet the problem like this?
 

Hi,
I have not worked on the GSM phones but I have worked on similar issues.
1) check the potential difference between the RF and the digital
2) Power supply filtering.
3) Check the NF. NF seems to be high. Check the component srf and maximum frequency of usage.

Hope this helps,
B R Madhukar
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top