Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Send gps data through gprs

Status
Not open for further replies.
sending some data from mobile via gprs
how to do same from mobile device itself, i mean how to do this using mobile
 

Re: tk-102 gprs programming

I have some how a same problem.. I have develop a gps device which should sent data to particular IP, I have used Ublox, Atmel Avr at2561 and Atmel flash memory.

I need to program my AVR and flash memory. and need a suggestion where should i Put my IP adress.

your reply will be really helpful for me.

Thanks
 

I am doing the same project but with module sim548c. Can anyone give me its code or AT commands to activate PDP context with the static IP i have.

- - - Updated - - -

I am doing the same project but with module sim548c. Can anyone give me its code or AT commands to activate PDP context with the static IP i have.
 

Re: tk-102 gprs programming

HI ALL
DEAR I SEND GPS DATA THROUGH GPRS
I HAVE SERVER IP & PORT SERVER
PLEASE SEND AT COMMAND FOR SEND GPS DATA to ip

if gprs is not available then send the information with sms

i am using sim300d

please help :cry::cry:

this is my project for practical examination.

Find AT commands which is common for all GSM
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top