Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

self aligned structure

Status
Not open for further replies.
when you diffuse drain and diffusion areas,they automatically aligns beneath the polysilicon(as polysilicon acts as a mask)..This is called self aligned structure..
 

    gafsos

    Points: 2
    Helpful Answer Positive Rating
usually it refers to the famous CMOS diffusion implanting process, first the poly gate and gate oxide id build up , then use ion implanting to hit wafer surface, it will be blocked by the poly gate, but the exposed drain and source will be penetrated by the implanting ions and gradually, drain and source is formed to make a complete transistor, that is so-called self-align structure.
 

    gafsos

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top