Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

.sch file and .sp file

Status
Not open for further replies.
D

diljithunni22

Newbie level 1
Joined
Oct 20, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
6
hi,
what is the difference between .sp(spice netlist) and .sch(schematic netlist) files:-(

Thanks
 

diljithunni22 said:
and .sch(schematic netlist) files
Click to expand...

There are more than one software tool that make use of the .sch extension, therefore for a precise answer you need to specify the CAD ( although its structure in text formatting is currently becoming somewhat standardized ).

Anyway, in short words, a schematic netlist is aimed to describe only the drawing of the objects in a circuit inside the sheet, whereas spice netlists are intended to define values to each component so that can be used for simulations.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top