Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Scaling Image to Proper Size for PCB Manufacturing

Status
Not open for further replies.
L

Lincoln Santos

Newbie level 2
Newbie level 2
Joined
Aug 6, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
9
The PCB img is right? I would like to print and transfer it to the board, but the size of the image does not seens right.
 

Re: Home made guitar Noise Gate

You can use a free graphic tool like Irfanview to scale the *.gif image to the correct size when printing it. You know that the pin distance of the DIP8 OP-package must be close to 2.54 mm.
 

Re: Home made guitar Noise Gate

FvM said:
You can use a free graphic tool like Irfanview to scale the *.gif image to the correct size when printing it. You know that the pin distance of the DIP8 OP-package must be close to 2.54 mm.
Click to expand...

Thank you very much!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top