Scaling analog input 0-30v and sending it to LCD with PARSIC

[sotron]

0-30v

Hello everybody.

For Parsic software out there. How can I scale it to show me 0-30volts.
Parsic at 16bits analog input is 0 at 0 volts and 1023 at 30volts.
Can any Parsic user help? please.

Thank you.
Sotiris.:|

 

[wizpic]

What's a Parsic ?

You can scale it wiht a resistor divider feed the 0-30V in to one side of a 100k resistor connect the side to a 6k8 and the ohter side of the 6k8 then use the center to feed into pic

If you google it (resistor divider) and you will find everything you need

 

[sotron]

Re: Scaling analog input 0-30v and sending it to LCD with PA

Parsic is a Visual pic programming-simulator software.
You draw the schematic, simulate it and make a hex file which you can program a pic micro. Very fast and easy software, no writing, no programming knowledge. The attachment is an up/down counter with reset, I did this in half a minute and sent it to a PIC16F628A.

Sotiris.