Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Saving selected results in Cadence ADE L

Status
Not open for further replies.

NikosTS

Advanced Member level 4
Joined
Jan 30, 2017
Messages
115
Helped
1
Reputation
2
Reaction score
2
Trophy points
18
Activity points
1,026
Hello everyone,

I am simulating a rather large netlist on ADE L, but i want to save the results of the outputs only ( 4 signals ).
From the Outputs tab i select : Save all ---> and tick selected.]
But when i start the transient simulation , the tool still tries to save every single node.
Am i doing something wrong?

Thanks in advance
 

NikosTS

Advanced Member level 4
Joined
Jan 30, 2017
Messages
115
Helped
1
Reputation
2
Reaction score
2
Trophy points
18
Activity points
1,026
See netlist regarding tran statement.

Can you be a little more specific?
You mean i should go to Simulation tab --> Netlist --> Display? And after that, what should I look for?

Thanks
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top