Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

satellite pro 6100 power failure

Status
Not open for further replies.

maniana

Member level 4
Joined
Sep 4, 2006
Messages
77
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,939
Hi,

I have a toshiba satellite pro 6100 giving the following error (flashing LED when I press power button):
82h
BGVSNS voltage is not more than 1.02V when the computer is booting up

I checked the connector between the power board and the motherboard and it is fine. There has to be some component burned on either board.

Do you know what components could be broken? Where to measure this voltage? How to fix it?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top