Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

SALE - Stereo Encoder Coder for FM broadcasting

Status
Not open for further replies.

max-bit

Newbie level 5
Joined
Mar 28, 2013
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,485
Stereo Encoder Coder for FM broadcasting - MPX

Two L + R inputs
Composite MPX Output
Project It is based on the PIRA.CZ project

Tiny size - Great parameters - See below

Power adapter included


Characteristics:
- Signal overshooting prevention (overshooting max. 10 %)
- Low noise and distortion
- No adjust (only pilot tone level and output level)
- High channel separation and spectral purity in common operation
- RDS input and pilot sync. output makes easy to connect any RDS encoder
- Microcomputer controlled, hex file provided for free
- All parts are easy to buy (incl. crystal)
AND
Supply voltage: 9-16 V
Quiescent supply current (12 V): 34 mA
Audio 19 kHz rejection: 40 dB
Channel separation at 1 kHz: >55 dB
Subcarrier rejection: >60 dB
Pilot sampling frequency: 1.843 MHz (19 kHz x 97)
Subcarrier sampling frequency: 1.843 MHz (38 kHz x 48.5)
Pilot sync. output: TTL
Max. audio input voltage: ~ 5 V pp (1.7 V rms)
Pilot tone level: linear adjustable 0-0.5 V pp
Output voltage gain: linear adjustable 0-1.5
Audio input impedance: 2000 ohm
RDS input impedance: 1000 ohm
MPX output impedance: 500 ohm
Pilot sync. output impedance: 10000 ohm
Signal-to-noise ratio: >70 dB

Price - 120 Euro / 150 $ (USD) + Shipping cost ->>> - If interested, please write message on PRIV.


 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top