Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Safety, Flamability etc. for Heaters

Status
Not open for further replies.
A

ASIC

Full Member level 3
Joined
May 18, 2001
Messages
164
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,298
Activity points
1,205
1. What approvals are required for home appliances with heater elements like hair dryer and toilet hand dryer?

2. What safety components are required (i.e. thermostat etc.)?

3. What creepage and clearance distances are required between heater and enclosure, if enclosure is plastic?

4. If enclosure is brushed aluminium?

5. Any flamability requirements for the plastic enclosure?

6. What kind of plastic is used to ensure (5)?

7. If speed control is using electronics (without transformer, i.e. operating directly at 220V), what are the requirements?

8. Any other information is very very much appreciated


Thank you
ASIC
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top