Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Saber Designer - problems with starting on win xp

Status
Not open for further replies.

PicBlaster

Member level 1
Joined
Apr 30, 2001
Messages
41
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
159
Saber Designer on win xp

Hi i have some problems starting this program on a win xp machine, can someone please help.

Best regards
PicBlaster
 

The problem is that i get the error "could not get the licence package saber_scope"

PicBlaster
 

Are you sure that your version of Saber supports WinXp?
 

Have you check your license, is that the license required in it ?

You can use lmstat to check the license feature.
 

It seems this problem is nothing to do with the compatibility for WinXp, check you license file and the installation.

For WinXp compatibility problem, it will come out after you get yout schematic done and start to simulate your circuit. It will be reported as program subroutine error.
 

you try change AILM_LICENSE_FILE=7182@*****
to AILM_LICENSE_FILE=c:\windows\saber.lic
 

saber 2001 can't run on xp,win2k is ok!
 

wcarl said:
you try change AILM_LICENSE_FILE=7182@*****
to AILM_LICENSE_FILE=c:\windows\saber.lic

this is right, i 've run saber2002.2 on winxp correctly . you should modify the first line of the license file, replace the 'name' word with your computer name, and then copy the license file (saber.lic ) to c:\windows.
 

I have modify the license file, and now it's working great.

Thanks to all for the help

Best regards
PicBlaster
 

Re: Saber Designer on win xp

Hi my freind,
I need good document about Saber Designer. Would you please share it with me?
Thanks,
 

Have anyone use Saber&Smash ?

Smash support Spice/HDL_A/HDL design , how about saber ?
saber support spice /verilog or not ..
which is better tool for mix_mode simulation ?
 

gxcr said:
saber 2001 can't run on xp,win2k is ok!


Hi,

Did you use an NTFS Format or FAT32 Format for Win2K?


thanks !
 

"saber 2001 can't run on xp,win2k is ok!"
i am using it on winxp and it is fine. the license available on net dose not contains full saber features.
patchin is the only option if u do not have full license.
hock
 

Re: Saber Designer on win xp

as I know , saber must be run under NTFS .system..
not FAT32 ..
 

Re: Saber Designer on win xp

saber works only on NT plateforms and that too on ntfs systems.
i have tested my latest saber version and it is working fine on winXP system. you may check matlab support as only 5.3 is supported.
hock
 

Re: Saber Designer on win xp

somebody run in linux?
I don't know how to setup
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top