Terminator3
Advanced Member level 3
For example:
**broken link removed**
Reference plane is placed at 1.3mm from device center (at 2.6mm diameter, where leads just touched the substrate).
But also there are substrate parameters given:
Substrate used is t=0.254 mm + many vias to ground on source pins.
All those vias (inductance), is it included in S-parameters?
**broken link removed**
Reference plane is placed at 1.3mm from device center (at 2.6mm diameter, where leads just touched the substrate).
But also there are substrate parameters given:
NE3511S02 RF MEASURING LAYOUT PATTERN (REFERENCE ONLY) (UNIT: mm)
RT/duroid 5880/ROGERS
t = 0.254 mm
εr = 2.20
tan delta = 0.0009 @10 GHz
Substrate used is t=0.254 mm + many vias to ground on source pins.
All those vias (inductance), is it included in S-parameters?