By the way what is AoA???Hello and AoA every1
Kamal here, can anyone please guide me about the development of an RTOS?
i have to design an RTOS as part of my FYP, and i have read number of books about RTOSes and i know lots of basics about RTOSes but the problem is the development which unfortunately i cant do and i'm unable to get/find any help about that.....i know RTOS, but want guidence about its development
An early reply will be whole heatedly appreciated
Regards
Kamal
---------- Post added at 02:47 ---------- Previous post was at 02:46 ----------
P.s. I have to develop an RTOS for PIC18
By the way what is AoA???.
Kamal ... Do you mean to develop a project using RTOS for PIC-18 ???
Or do you mean to develop "The RTOS" for PIC-18?
If your answer is the second one then please keep in mind it is not a small single-handed project.
For a reference you can take the FreeRTOS as a model or base.
Even the FreeRTOS supports PIC.
Later you can add stuffs to that( modify ) and can say a variant of FreeRTOS.
But if you want to do it from scratch, then it is too big for a final year project for a single person.
https://www.edaboard.com/threads/203855/
I have written an RTOS for the Pic24, 30, 33 16-bit micros and posted it on eda board here.
I don't know if this will be much help for the Pic18 micros, but might give you some ideas.
Nice and same to you.Well! AoA means Assalam o Alikum! a salutation ******* use when meet each others.It means "*** may protect you"
Well What I meant is refer that code and learn how it is been implemented, Next you write your own. As the project is Open-Source you can take the whole project or part of that.I mean developing "The RTOS" for PIC-18
Yes i have seen this.Thankyou for the link.Would you please explain how can i use it as "base"? Would you please elaborate this line?
and if you mean using it as a base for my project, is it fulfilling the heading of my project "Development and Implementation of Real time operating system using PIC" ?
Nice and same to you.
Well What I meant is refer that code and learn how it is been implemented, Next you write your own. As the project is Open-Source you can take the whole project or part of that.
in my opinion you may take few header files for HW abstraction and write the rest of code by yourself. It will be a very good project and starting point. Hence you goal will be solved.
NOTE: Please do mention if you take any part from any Open-Source project.
In this way you give credit the original author.
OK thnx.and did you made this from scratch or you also adopted an open source?
and one more thing, could you please refer me a good book that you studied for this development.and actually i'm working on PIC18F and i'm not yet gone into the depth of its architecture
Well I am not such a advanced programmer. I have written a small educational and research OS in C++ for x86. it is far from being complete. I have never tried any RTOS besides Linux and QNX. That to on PIC is a big no no from my side.:lol:
But there is no harm to try out new adventures. I am thinking of trying out though.
Man!! Thankyou so much...I'm studying your's RTOS , and its really very helpful..well lets move on, hope we'l b in contect
TC
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?