Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

RTL to GDSII stream in issue

Abhi.ranjan

Junior Member level 1
Joined
Nov 9, 2022
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
88
While streaming in the gds file (generated by innovus), I am not able to see all the layers even the metal connection are missing only the drawing of outline are present.

What can be the issue?
 
check the GDSII file using a simple visualizer like Klayout or calibredrv.

If the layers are there, the problem is in streaming it it. Check the logs. I assume you are using Virtuoso for stream in, if it encounters problems it usually issues warning but does not stop. So check the logs.

If the layers are not there, the problem is in streaming it out from Innovus. Check your layer map file and the logs.
 

LaTeX Commands Quick-Menu:

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top