Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RS-232 serial communication

Status
Not open for further replies.
D

dayal

Member level 3
Joined
Aug 26, 2007
Messages
54
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,629
Hi ,

I would like to know about Interfacing 8051 microcontroller into PC via RS-232 connector, can anyone tell me how i can do it,
what are the steps i can take ..
 

you can use RS232 Driver chips..."MAX232 - MAX233...."
read the datasheets and you will understand everything
!
after reading ask your questions heare :)
 

In the down load software section there is an RS232 communication software use max232 as an interface with the 8051 core.For connecting the H/W u can refer the data sheet or u can go through mazid and mazid book or ayala book pls let me know if u have any problem
 

use mscomm control in vb send ascii coded signals from your controller via 8051 serial port this is the right and easy way to go
 

Attachments

  • uctrainerkit_3281.pdf
    264 KB · Views: 68

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top