Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

RF coverage simulator

Status
Not open for further replies.

yuyu

Advanced Member level 4
Joined
Mar 27, 2002
Messages
108
Helped
13
Reputation
26
Reaction score
12
Trophy points
1,298
Activity points
1,018
pathpro mlj software

Anyone knows RF coverage simulator?

Thanks
 

swtap

Hi,
If you mean propagation prediction, network planning there are a lot of
stuff like:
Programm - Company
ICS Telecom - ATDI,
PLANET - MSI,
DeciBell Planner - MapInfo,
WinProp - AWE Communications,
ATOLL - FORSK,
EDX SignalPro - EDX Engineering,
СHIRplus и MULTIlink - LS telcom,
RFcad - CDS,
SitePlanner and SMT Plus - MPRG RF Lab,
PathPro and PathView - MLJ,
EET и TEMS - Ericsson,
HERALD - Radio Engineering Services
SWTAP -Softwright
You can ask EDX about demo or download SWTAP demo (~120 M)
Unfortunately you can perform study on fix piece of map only :cry:
Regards,
FedICResearch.
 
download atoll forsk demo free

Any link to this software ?
Thank you.
 

ls telcom atdi network planning

Any news about this kind of software?

Thanks.
 

At, you must specify you frequency band(HF,VHF,UHF and MW). for HF band you can download free software from internt(for example from ITU).
for Higher band you can write simple program by experimental coverage prediction method(for example by ITU P.1546 recomendation) and also by simple theoretical methods
sincerely yours
:D
 

Dear All,
I will be very thankful If you can send me link for downloading any of these softwares

ICS Telecom - ATDI,
DeciBell Planner - MapInfo,
EDX SignalPro - EDX Engineering

I have GEOTIFF format of digital map and I asume it will work with above
mentioned softwares.
Frequency band in which I will use the software is VHF and UHF

Thanks
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top