kranthi_vlsi
Newbie level 5
Hi
I have one module like revolution counter which will count the revolution of motor.for that module 3 I/p are there clk,reset,motor angle of 15 bit when motor angle crosses 0 degrees in positive direction the count value increments one and it crosses 0 in neg direction it decrements 1....can u suggest logic or vhdl code for dis
p.s there is no direction pin
I have one module like revolution counter which will count the revolution of motor.for that module 3 I/p are there clk,reset,motor angle of 15 bit when motor angle crosses 0 degrees in positive direction the count value increments one and it crosses 0 in neg direction it decrements 1....can u suggest logic or vhdl code for dis
p.s there is no direction pin