Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Request : USB driver for WINNT!

Status
Not open for further replies.

Phytec

Newbie level 6
Joined
Jul 25, 2002
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
19
Is there anyone out there who has an WINNT USB driver for a USB memory pen/stick? :(

I know that WINNT doesn't support USB, but I have seen some USB mouses running under WINNT, so there has to be a way!!!! :cry:
If not, is it possible to make it with software like windriver?

Thanks in advance :wink: !
 

Spasomat

Junior Member level 3
Joined
Jun 19, 2002
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
208
To my knowledge M-Systems is the only memory stick manufacturer with an USB-driver for WINNT.
Look at hxxp://www.diskonkey.com/

Have fun,

Spasomat
 

Phytec

Newbie level 6
Joined
Jul 25, 2002
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
19
Do you know if this driver works for all sticks, or only for their own? :?
 

dainis

Advanced Member level 4
Joined
May 15, 2001
Messages
1,126
Helped
53
Reputation
106
Reaction score
9
Trophy points
1,318
Activity points
9,268
I also have:
| USB For Windows NT 4.0 |
| Get the Benefits of USB on Windows NT 4.0 |
| |
| USB For Windows NT 4.0 allows you to use plug-and-play USB |
| (Universal Serial Bus) mice, keyboards, printers, and Pocket PC |
| cradles (HP Jornada 545/548, Compaq iPaq and Socket's USB Sync Card) |
| on your Microsoftо Windows NT 4.0 PC, at a price you can afford. |
| Windows NT 4.0 users, both enterprise users and consumers, can get |
| off-the-shelf USB capability without having to upgrade their operating |
| system, use a dual boot system, or develop device drivers. |
| The easy-to-use USB For Windows NT 4.0 solution adds flexibility and |
| helps people working in a Windows NT 4.0 environment realize the |
| benefits of combining the features of Windows NT 4.0 and USB mice, |
| keyboards, printers, and Pocket PC cradles. USB For Windows NT 4.0 |
| does not support any other devices, or hubs that support the four |
| devices, than the ones listed above, mice, keyboards, printers, |
| and Pocket PC cradles. |
| |
| If you're using Windows NT 4.0, USB For Windows NT 4.0 is one of the |
| easiest ways to get USB capability. |
| |
| start setup.exe and install it. or start usbmanua.chm for the manual |
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top