Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Request for HV Pulser Circuit for Electric Fence.

Status
Not open for further replies.

pico

Full Member level 6
Joined
Sep 30, 2001
Messages
323
Helped
32
Reputation
64
Reaction score
19
Trophy points
1,298
Activity points
1,887
electric fence schematic

Happy New Year to all,

I need to build a HV Pulser for Electric Fence use.
Anybody please help.

Thanks in advance.
 

electric fence circuit

use a line output transformer { tv lopt or a flyback or trippler driver}

and a small 555 oscillilator to drive it

i remember looking in the guts of one
and this is all it had

the eht comes from the top of the box
i am sure it was just a transformer with no trippler though as it had a 2.5 kv electrlytic @ 4mf cap also being driven by the coil and eht


and had a sticker said danger 2.5 kv on top

so it is saft too assume it has no trippler

you need an old style version from a ferguson or baird tv you will also be able to buy these from a tv supplier explaining what you need several sony and english tv sets lots of german grundig etc use this system so find a tv with a working stage find the diagram

wire it up and drive a cap

runs on 150V drive{ or around this} to get this you need to build a 12v too 240 v inverter and also limit the volts too 150 or just build a 150 v inverter

typing

electric fence schematic into google
produced a few examples
h**p://w*w.google.com/search?hl=en&ie=UTF-8&oe=UTF-8&q=electric+fence+schematic+&btnG=Google+Search



https://www.mrsf.com/wiring.htm how this guy did it
will be to supply a trippler with 117v ac from the psu

the output of the trippler was prob current limited to just a few tenths of an amp
or less


but the rest of his schematic is nice although each individual part is a unit in its self
 

electric fence circuit diagram

One thing to keep in mind when selecting the output voltage is the danger of setting dry grass on fire. The higher voltage units are banned in one area due to the forest fires started by them.
 

electric fence schematic diagram

esp if flatulent too near them


but a good point


so 2.5 kv is too high??

2.5kv will jump 1" or 2" or so in damp air

so i guess mount the hotwire a little higher


i think dry grass is good anyway
 

electric fence circuits

this is from w*w.homepower.com ( a really cool web page btw).


enjoy :)

Mr.Cool
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top