Req: PCB Material for 5.6 or 5.8GHz Design

[riz_aj]

5.8 pcb

You can use Getek or Getek II for design with lots of microstrip and stripline. Lower dielectric loss and and more stable.

Link is here h**p://www.geplastics.com/electromaterials/products.htm

 

[edf]

standard pcb thickness and material for 20 ghz

Gil Technologies has laminates in thicknesses from .0035 to .06 inch with Er approx 3. Loss tangents approx .004 at 10Ghz. Varies from $7 to $20 per sq ft depending on thk for double sided clad.