Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Req info: pressure sensor XPFM-115KPA (C) Fujikura

Status
Not open for further replies.

incognito

Member level 2
Joined
Dec 31, 1999
Messages
42
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
309
Hi,


I recently received a free pressure sensor which seem nice.

The thing is I only found this 4 pages datasheet :
https://www.fujikura.co.uk/pdf/xfpm_hm.pdf

and some italian documents which are not enough detailled

What I know is these few details related to the output voltage regarding pressure:

for pressure from 960hPa to 1040hPa, the sensor gives voltage from 3.84V to 4.2V.

I dont even know if the output is linear or not!

Since I don't have a pressurised chamber to get some measure points I realy need some curves or formulas, ie Vout=f(pressure) like curves, or Vout@pressure=f(temperature)...

Any help will be greatly welcome :>

Rgds
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top