Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

REQ: ADUc814 - electronic ballaster project

Status
Not open for further replies.

boram69

Member level 1
Joined
Jan 6, 2002
Messages
41
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Activity points
212
REQ: ADUc814

Dear Master!
My Project is electronic Ballaster.
ADUc814 is Controled it's Operation.
But First Start Time Delay is long (maybe 1sec), and Sometimes Chip goto Download
Mode when ignition voltage Exploded (About 2KVolt).
Mybe Noise effect!
How Can Solved it!
Please! reply it.
Have a nice day!
 

Try to reduce the noise efect using a multilayer PCB, optoisolated inputs and outputs. Use smd capacitors to reduce dv/dt of the IO pins. The impedance of inputs must be reduced as low is posible using resistor networks. The ground plane must be as large is posible.
Do not forget to screen the board; conect the screen at a "silent" potential.
 

Thank you Your Advise
I'll Execute your indication and post reply it
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top