Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Reporting Power in MAGMA

Status
Not open for further replies.
L

libinpk

Junior Member level 1
Joined
Jan 20, 2010
Messages
15
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,379
hi,
i wish to find out the power consumption at post cts and post route stage of my design. Im using magma. When i do a report power analysis, it is showing the power in terms of leakage , swcap and internal power.
But what im interested is the dynamic power. Is it the same as the sum of swcap + internal power?

Any help is greatly appreciated.

Cheers.
 

hi,
i wish to find out the power consumption at post cts and post route stage of my design. Im using magma. When i do a report power analysis, it is showing the power in terms of leakage , swcap and internal power.
But what im interested is the dynamic power. Is it the same as the sum of swcap + internal power?

Any help is greatly appreciated.

Cheers.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top