Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Remote Control for Your PC

Status
Not open for further replies.

gsmsikar

Member level 2
Joined
Dec 19, 2003
Messages
48
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
340
6710v00007d lg remote

i have made the infrared interface for the serial port, but i dont know/understand how should i configure the remote control units,
i have some remote control units which are of TV, VCD players but they r not of any international brand , and i know which ICs r they using in them...
can anyone help me how to configure my remote with the software in my pc ?

please help...

my remotes are :-

1. LG Remote 6710V00007D.
2. BPL color TV Remote RC782
3. Videocon color tv remote WLR1700.
4. set-top-box remote using IC NEC D6121G0001

some links..
http://lnx.manoweb.com/lirc/
http://www.heatseekerz.net/index.php?page=articles&id=4&pagenum=1
http://winlirc.sourceforge.net/
 

Analyzer

Full Member level 6
Joined
Nov 18, 2001
Messages
374
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Activity points
3,518
Hi,

I think you built a winlirc ir port for your pc.Winlirc works like this :
User teachs ir remote codes to winlirc and winlirc sends codes to programs.
So you should teach each buttons of infrared remote to winlirc.It is easy to do, i configured all buttons of my TV remote to winlirc.
The best start is reading its readme, help files and manual.
Cheers,

Analyzer.
 

gsmsikar

Member level 2
Joined
Dec 19, 2003
Messages
48
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
340
yes i build the winlirc ir port , but dont know how to configure my remote to work with it , i want to use LG CTV Remote 6710V00007D.

please help me configure the remote ...

thanks
 

Analyzer

Full Member level 6
Joined
Nov 18, 2001
Messages
374
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Activity points
3,518
Dear gsmsikar,

It is not hard to configure and teach code to him but you must use its manual.There is a very detailed manual and it tells step-by-step configuration.
Cheers.

Analyzer
 

Pazam

Member level 2
Joined
Mar 31, 2002
Messages
44
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
404
Dear gsmsikar,

I recently built the same adapter.

I recommend using a software named "Girder" - http://www.girder.nl/.
(Note that versions prior to 3.3 don't have any limits).
It's easy to use and most powerfull.

For the adapter you've built you'll need to download the "Igor SFH56-device" plugin from the site and configure it to use DCD.

Regards,

Pazam
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top