Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Remote car door: infrared or ultrasonic?

Status
Not open for further replies.

syrax

Full Member level 3
Joined
Sep 15, 2005
Messages
183
Helped
11
Reputation
22
Reaction score
3
Trophy points
1,298
Activity points
2,620
ck1616 kit

please give me a idea what kind of comunication to use for my car project:
i wanna made a electro door on my car. but i don't know what type to use
Infra red ot Utrasonic . If some can help me :))
 

Re: remote car door help

Better option than IR or ultrasonic is 433MHz RF link ..
Here is an example:
4 CHANNEL AUTO ROLL RF REMOTE CONTROL RELAY BOARD
**broken link removed**
**broken link removed**

Regards,
IanP
 

Re: remote car door help

i wanna do myself, with about 10 channels for diferent part of my car. :)) if have some circuit for this please post it :)
 

remote car door help

rws434 and tws 434 are easily available rf rx/tx pair, u need a decoder and encoder, now if encoder has 8 address pin and 4 data pin, u can use data pin as different channels and u can get 15/16 combination. if u need further help on this track feel free we will help u.
 

idea

is good idea to get system from rf remote car, i only will get the encoder and decoder, and make my own system with Microcontroller
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top