Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reliability analysis(NBTI/HCI)

Status
Not open for further replies.

sapnak8

Newbie level 4
Joined
Mar 9, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
jaipur
Activity points
1,328
Hi all

I am working on the reliability issue of analog/digital circuits.Does anyone know any AgeMOS model for any technologies. As I have studied that there is no certain MOS model for BTI/HCI effect.I have just learnt that HSPICE provide MOSRA model to include the effect of reliability. Does anyone have experience of using MOSRA model. Or can you suggest me any other way to study the impact of aging. I need to apply the aging effect on differential amplifier.

I am stuck.Please help me.

Thanks
 

The model is never certain until you fit it to the data.
That is what's missing. Foundries like to put out couple-
page PDF reports and hold the data real tight. Someone
looking too carefully, might find errors and mess up the
whole qual "done-ness".

"Aging" in the HCE/NBTI aspect is very bias-point-dependent.
Digital qual results are not going to give you what you need.
That is, a pretty fine grained but broad survey of drift vs
conditions, which you would then assess for "no prob" and
"oh noes" regions, and the zones in between where you
have to anaylze rather than adopt / avoid based on rules.

You can include the effects. But to make it worthwhile
and not a false confidence / false panic exercise, you
need to know those effects and what activates /
modulates them.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top