Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

rejection of EM(S12) of the inductor

Status
Not open for further replies.

mustangyhz

Member level 5
Joined
Nov 18, 2008
Messages
87
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,978
In dependence of EM(S12), there is a rejection, does anybody know why there is a rejection? This is not repeated by dependence of the extracted equivalent model.

rejection.JPG
 

volker@muehlhaus

Advanced Member level 5
Joined
Apr 11, 2014
Messages
2,510
Helped
982
Reputation
1,966
Reaction score
963
Trophy points
113
Activity points
14,880
This S21 resonance is from the inductor's self resonance (inductor L + parasitic parallel C). Your inductor equivalent circuit model should have this capacitor, and you should see the S21 resonance.


If you don't see this, your equivalent circuit model might be too simplistic.
 

    V

    points: 2
    Helpful Answer Positive Rating

mustangyhz

Member level 5
Joined
Nov 18, 2008
Messages
87
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,978
This S21 resonance is from the inductor's self resonance (inductor L + parasitic parallel C). Your inductor equivalent circuit model should have this capacitor, and you should see the S21 resonance.


If you don't see this, your equivalent circuit model might be too simplistic.
thanks!!!
thanks!!!
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top