Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Regarding to the cc2500 zigbee module

Status
Not open for further replies.
S

SINDHURI

Member level 2
Member level 2
Joined
Dec 13, 2012
Messages
46
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,662
Good Morning one and all,

CC2500 WITH RS 232 OUTPUT.JPG
I want to know is there any Analog to Digital Converter(ADC) presented in this module shown in the figure below.

Thanks in Advance.
 

It is a Zigbee module and not any ADC. Check your previous thread you created somedays back. You had asked about the pin connections. I have answered in that thread.

https://www.edaboard.com/threads/287488/#post1229525

The green board on top of the red board is the wireless board. You can see it has a onboard antenna. There is no ADC in that board. Maybe you posted the wrong image.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top