//******************************
// Terminal Script
// Created: 8/18/2012 6:29:32 PM
//read more on www.electronics-base.com
//******************************
begin
ComSendstr('first line');
Delay(1000);
ComSendstr('second line');
Delay(1000);
ComSendstr('third line');
Delay(1000);
end.
https://www.edaboard.com/threads/228501/prakashvenugopal said:Is there any terminal software to send the frame with 50msec delay. Please let me know.
//******************************
// Terminal Script
// Created: 8/18/2012 6:29:32 PM
//read more on www.electronics-base.com
//******************************
begin
ComSendstr('first line');
Delay(50);ComSendchr(13);
ComSendstr('second line');
Delay(50);ComSendchr(13);
ComSendstr('third line');
Delay(50);
ComSendchr(13);
end.
15:37:18.000> first line
15:37:18.050> second line
15:37:18.100> third line
With docklight you can do that, but it is not a free software. Try googling "docklight" and you will get links for information, as well as demo version download.prakashvenugopal said:Is there any possibility send the above frame sequence with the delay of 50msec each. with the terminal software?
Hi,
My intention is to give a PC interface to my controller. Not to use the another controller to send the data.
Is there any possibility send the above frame sequence with the delay of 50msec each. with the terminal software?
Thanks,
V. Prakash
//read more about this at www.Electronics-Base.com
program ScriptTest;
begin
comsendstr(#035'01Zone1 Fire'#036#013);
Delay(50);
comsendstr(#035'02Zone2 Fire'#036#013);
Delay(50);
comsendstr(#035'03Zone3 Fire'#036#013);
Delay(50);
comsendstr(#035'04Zone4 Fire'#036#013);
Delay(50);
comsendstr(#035'05Zone5 Fire'#036#013);
Delay(50);
comsendstr(#035'06Zone6 Fire'#036#013);
Delay(50);
comsendstr(#035'07Zone7 Fire'#036#013);
Delay(50);
comsendstr(#035'08Zone8 Fire'#036#013);
Delay(50);
comsendstr(#035'09Zone9 Fire'#036#013);
Delay(50);
comsendstr(#035'0AZone10 Fire'#036#013);
Delay(50);
comsendstr(#035'0BZone11 Fire'#036#013);
Delay(50);
comsendstr(#035'0CZone12 Fire'#036#013);
Delay(50);
comsendstr(#035'0DZone13 Fire'#036#013);
Delay(50);
comsendstr(#035'0EZone14 Fire'#036#013);
Delay(50);
comsendstr(#035'0FZone15 Fire'#036#013);
Delay(50);
comsendstr(#035'10Zone16 Fire'#036#013);
Delay(50);
writeln('Programm finished');
end.
It will send data to COM port. Just before you run script you must select port, baud rate and click connect. Then you are ready to run script
??howing as out of memory while running the script.
i had run the script, it is getting compiled with no error
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?