Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Regarding LCD display

Status
Not open for further replies.
J

jayavardhan

Full Member level 2
Joined
Sep 1, 2006
Messages
124
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,296
Location
India
Activity points
1,840
hi all,

is it possible to display different languages other than English on an Alpha numeric display?

Please reply soon

Regards
Jayavardhan
 

HI

Yes , but it depend on the ROM inside the LCD you can see the char in the LCD data sheet or try to write char code above the 128 bit size of ASCII

e.g - write ascii code in the range of 128 ~256


All the best

Bobi
 

Yes, either use the extra RAM on the LCD to define custom characters or use external memory interfaced to the MCU to store the custom characters if you stay withing the (5x7) or (5x8) pixels per character you can display any pattern you like.

Cheers
Slayer
 

Yes but the GCRAM on character LCDs is limited to 8 characters. A GLCD has no character set and can display any language.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top