Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

References about rail-to-rail CMOS op-amp design

Status
Not open for further replies.

surianova

Advanced Member level 1
Joined
Sep 1, 2004
Messages
411
Helped
30
Reputation
60
Reaction score
8
Trophy points
1,298
Location
ASIA
Activity points
3,266
hi!

Any reference for design of rail to rail cmos opamp?

TX
 

Re: rail to rail opamp

Try this short article:
**broken link removed**
Regards,
IanP
 

    surianova

    Points: 2
    Helpful Answer Positive Rating
Re: rail to rail opamp

i got this from the IEEE journal....hope that i helped u
 

Re: rail to rail opamp

an overview of the rail to rail input stage
 

rail to rail opamp

Giuseppe Ferri and Willy Sansen, "A rail-to-rail constant-gm low-voltage cmos operational transconductance amplifier," JSSC, vol. 32, no. 10, OCt. 1997.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top