Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Rectangular Waveguide with obstacle

Status
Not open for further replies.

magnetra

Full Member level 5
Joined
Apr 21, 2005
Messages
263
Helped
10
Reputation
20
Reaction score
7
Trophy points
1,298
Location
27.45N, 85.20E KTM, NP
Activity points
3,375
I have a rectangular waveguide with the dimensions and alignment shown below in the figure. At z = 0 there is an obstacle in the form of an infinitesimally thin perfectly conducting plate placed as shown in the figure. A TE10 mode wave traveling along +z direction is incident upon the obstacle. I want to obtain the resulting fields due to the presence of this obstacle. Are new modes created due to this obstacle? How does it effect the power flow thru the waveguide? How do I apply the boundary conditions?
Please suggest how to approach this problem.




M
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top