Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

recommendation for low range RF rx and tx modules?

Status
Not open for further replies.
D

david90

Advanced Member level 1
Joined
May 5, 2004
Messages
423
Helped
9
Reputation
18
Reaction score
4
Trophy points
1,298
Activity points
3,611
I'm looking for a cheap but has some security rx and tx modules. Because the tx module in my project will be transmitting constantly, I need it to be low power and low range (10-20 feet).
 

If you can use chips instead of modules (cheaper) I would strongly recomend nRF905 from Nordic VLSI (http://www.nvlsi.com/) It is easy to use and relativly cheap, about 4USD in small qty(1-10).

/Froggy
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top