UFK
Member level 3
Hi
I made a block RAM and loaded a coe file in to it. Then using wires i connected the douta of my bram to wire w1 so i could load the values in an array. Problem is that ISE does not let me part select the vector array. what i want to do is load the decimal values from my coe file in to an array, location wise. Eg Adress 0,1,2,3 from bram should go in address location 4,5,6,7 of my array.
Please help. part of myy code is as follows:
I made a block RAM and loaded a coe file in to it. Then using wires i connected the douta of my bram to wire w1 so i could load the values in an array. Problem is that ISE does not let me part select the vector array. what i want to do is load the decimal values from my coe file in to an array, location wise. Eg Adress 0,1,2,3 from bram should go in address location 4,5,6,7 of my array.
Please help. part of myy code is as follows:
reg [31:0] LIP [0:31];
FiveA M1 (.douta(w1[1023:00]));
initial
begin
initial
begin
LIP [01:00] = w1[01:00];
LIP [03:02] = w1[09:08];