hi mr,
My understanding is the Channel is selected after the first Read, so sending 26 clock pulses will select Channel 'B' at a gain of 32.
The next 26 pulses will output Channel 'B' data.
Normally I use 25 pulses in order to select 'A' at 128 and a Arduino lib for the HX.
Which library are you using for you HX711 program code.?
Note the misprint on the datasheet between Fig #2 and Table 1, Channel select for 27 pulses.
what you said can be true but it is not in the datasheet
there is also another mistake on figure with pulses, they write channel B with different gains !
what you said can be true but it is not in the datasheet
there is also another mistake on figure with pulses, they write channel B with different gains !