Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

rc command to report D pins of DFF

Status
Not open for further replies.

rashmidesai

Newbie level 5
Newbie level 5
Joined
Nov 23, 2012
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,329
hi
what is the RC command to report the D pins DFF... coz i have to put an AND gate for all these D pins
 

Netlist ECO tool Gates On the Fly can do the job easily. You can use perl compatible script like following to add an AND gate to each D pin of each flop.
my @ffs = get_cells("-type", "ff", "-hier"); # Get all flops
foreach my $ff (@ffs){
my @dpins = get_pins("-input", "-data", $ff);
foreach my $pin (@dpins){
change_pin($pin, "AND2X2", "", "some_enable,-");
}
}
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top