Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RC circuits analysis help

Status
Not open for further replies.
K

kunalbansal52

Newbie level 4
Joined
Jun 25, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,333
hii , I have a small doubt regarding the analysis of RC circuits intuitively . here is the following code


*Simple RC circuit
Vs 1 0 PWL(0 0 .001 1 15 1)
R1 1 2 2
C1 1 2 2
C2 2 0 4
.TRAN .01 15
.PROBE
.END

and the graph plotted for node voltages V(2) and voltage across C1 is combined attached
graphH.png

Can you please explain me how do we get the node voltages at the steady state here , as from the graph it says v(2) and V(C1) finally at steady state is .8 v and .2 v respectively .. Please explain me how do we get it intuitively this value ..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top