Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

rayleigh flat fading vs frequency selective fading ofdm

Status
Not open for further replies.

anta

Member level 1
Joined
Jul 1, 2010
Messages
34
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Greece
Activity points
1,546
Hi all!
I have simulated a rayleigh flat fading channel (ofdm) and a frequency selective exponential channel in which every tap follows rayleigh distribution,thus every tap 'sees' a flat rayleigh channel (due to ofdm)...is this right? However i wonder what the plot would be? The plot (BER vs SNR) is almost the same for both cases?
This is right,isn't it?

Thank you in advance
 

anta said:
Hi all!
I have simulated a rayleigh flat fading channel (ofdm) and a frequency selective exponential channel in which every tap follows rayleigh distribution,thus every tap 'sees' a flat rayleigh channel (due to ofdm)...is this right? However i wonder what the plot would be? The plot (BER vs SNR) is almost the same for both cases?
This is right,isn't it?

Thank you in advance

doesn't anybodt know?
 

how many taps hav u used?? are they real or imaginary??
 

wow... 30 taps is too much, are you sure your modem is designed properly?

How much is the length of the CP and the number of subcarriers
 

Communications_Engineer said:
wow... 30 taps is too much, are you sure your modem is designed properly?

How much is the length of the CP and the number of subcarriers

The length of cp is 32 thus no ISI and the num of subcarriers is 16384
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top