Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Questions on USB protocol

Status
Not open for further replies.

promach

Advanced Member level 4
Joined
Feb 22, 2016
Messages
1,199
Helped
2
Reputation
4
Reaction score
5
Trophy points
38
Activity points
10,356
From https://www.keil.com/pack/doc/mw/USB/html/_u_s_b__protocol.html and https://github.com/sigrokproject/sigrok-dumps/tree/master/usb/setup , I have few questions:

1. Why there are two different pipes labelled as 1 and 2 ?

2. What does it mean by 8 microframes of 125us ?’

3. Why the usb_failed_setup_fullspeed.sr waveform being a failed setup ?

4. I do not quite understand the dribble mechanism in section 7.1.9.1 of usb2.0 specification document.

1.png


2.png


3.png


4.png
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top