Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
The voltage division is worked out for DC, R1/R1 + R2. Then the time constants (CR) of both resistors are matched. e.g. a CRO with 50 pF// 1Mohm input. Divide by 10 attenuator, 9 M ohm in series with a 5.5 pF cap across it.