Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question on LVDS transmitter

Status
Not open for further replies.
S

suhas_shiv

Full Member level 2
Joined
Nov 30, 2005
Messages
136
Helped
11
Reputation
22
Reaction score
4
Trophy points
1,298
Activity points
2,461
What is usually the input to a LVDS transmitter/driver? Most of the times it's a pulse, what is the Vih, Vil and common mode level(if any)?
Appreciate any response.
 

If I understood your question correctly, the Vil and Vih just depend on the digital logic you used. At trasnmitter side there is no spec on Vil/Vih.

I hope this site will help.

**broken link removed**

http://www.fairchildsemi.com/an/AN/AN-5017.pdf
 

suhas_shiv said:
What is usually the input to a LVDS transmitter/driver? Most of the times it's a pulse, what is the Vih, Vil and common mode level(if any)?
Appreciate any response.
Click to expand...

output swing 250 mV to 450 mV
out common mode from 1.125 t0 1.375v

input swing is from 100 mV to 400 mV.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top