Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

question about sar adc test

Status
Not open for further replies.
J

jeremy_zhu

Member level 2
Joined
Aug 19, 2006
Messages
42
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,542
recently , i'm testing a sar adc . an arbitray wave generater or an active crystal as the clk signal of the adc in the test board.
and foud the dynamic performance of adc using active crystal better than that using the former one.
so how to improve the test results by using the AWG .?(50 ohm res in the board as the load of AWG)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top