Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question about low level pixel format and EDID

Status
Not open for further replies.
A

alffnot

Member level 1
Joined
Nov 10, 2003
Messages
38
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,288
Activity points
382
dvi, EDID data structure

i was looking over the DVI standards and they mention that low level pixel format does not have to be listed in the EDID, so am i correct to assume that if i plan to run only low level pixel format that i can just completely leave the ddc pin on the output of the video card unconnected. or does the DDC do more that just tell it what the mointors capabilites are. hopefully someone here can help me out. thanks alot
 

Re: dvi, EDID data structure

DDC seems to be an I2C type of interface to me, I'm not very familiar with DVI spec, but I know there are systems with DDC left unconnected.

casual3
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top