Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question about customizing shortcut keys in Cadence Allegro

Status
Not open for further replies.
N

ngkl99

Member level 1
Joined
Dec 1, 2011
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,559
hi
when I customize the short cut keys, I notice some differences for example
F3 is add connect
i add "c" as add connect
but I need to press c, then enter, to start routing,
while I just need to press F3 to start routing

meaning, press F3 is just one step process
press c and enter is 2 steps process

How can I improve the press "c" function.

Thanks!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top