Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

question about cmos inverter

Status
Not open for further replies.

alpeshchokshi

Full Member level 2
Joined
Mar 5, 2006
Messages
127
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,296
Location
San Jose, CA
Activity points
2,064
hello friends,
i have question regarding cmos basic inverter.
1) in cmos inverter if i will interchange my nmos and pmos, then what is the name to the new ciruite? what is my output?

2) in cmos inverter if i will connect my output again fedback to the input than how the ciruit is going to work out? what is the name of circuit?
 

Although intended primarily for digital use, the basic CMOS inverter can be used as a linear amplifier by biasing its input to a value between the logic-0 and logic-1 levels; under this condition Q1 and Q2 are both biased partly on ...

Figure 15 shows a practical linear CMOS inverting amplifier stage. It is biased by wiring 10M resistor R1 between the input and output terminals ...

Quote from:
**broken link removed**

Regards,
IanP
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top