Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question about capacitors values in AD1871

Status
Not open for further replies.
C

carmel

Newbie level 1
Joined
Jun 16, 2008
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
In the ADI datasheet in the input pins of the modulator (CAPLN & CAPLP) there are 3 capacitors: an 1nF between them and two 100pF on each pin tied to gnd. In other application board focused on ADI DSP (Blackfin or others) that use the AD1871 as A/D converter, I noticed that these 3 capacitor for each input are different in value from what suggested in datasheet of AD1871. Usualy there are two 1nF (or 10nf) to GND and a 100pF between this pins. Is there someone that can clarify about this.
Thank you
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top