Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

query in byte blaster/signal topic logic analyser

Status
Not open for further replies.
V

vsrpkumar

Member level 4
Joined
Mar 26, 2006
Messages
74
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,830
Dear All.
I want to see the signals in the EP2C12Q240C8 FPGA for my design inside with several instances..It has EPCS4 configuration device .I am using quartus7.1 s/w.I am using byte blaster II download cable.I am using LVTTL standards for all I/O with VCCINT 1.8V VCCI/O 3.3V.Which logic analyser i have to use signaltap or signal probe.Is it possible.I am unaware of the term JTAG .Please help me as i am in stalemate postion.I want to debug the signals.
thanking you
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top