Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

quadro 6000 vs tesla c2070

Status
Not open for further replies.

HOHOH

Member level 5
Joined
Feb 13, 2002
Messages
82
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,288
Location
Korea(the Republic of Korea)
Activity points
483
Hello.

I have a question of performance about quadro 6000 and tesla c2070.

Dell and HP support tesla c2050 and quadro 6000.

I think quadro 6000 and tesla c2070 are very similar.

I want to use tesla c2070. Unfortunately, Dell and hp don't support tesla c2070.

Please let me know good choice for em simulation.
 

biff44

Advanced Member level 5
Joined
Dec 24, 2004
Messages
4,992
Helped
1,372
Reputation
2,740
Reaction score
1,045
Trophy points
1,393
Location
New England, USA
Activity points
37,576
These guys will make you a workstation with two c2070's:

**broken link removed**

I have found a couple papers that briefly mention HFSS, but are more geared to mechanical/fluid flow supercomping.

Such a machine would need to have HFSS set up to use it properly. I suggest discussing it with them.
 

plasma

Advanced Member level 2
Joined
Dec 20, 2001
Messages
534
Helped
79
Reputation
158
Reaction score
41
Trophy points
1,308
Activity points
3,854
Hello.

I have a question of performance about quadro 6000 and tesla c2070.

Dell and HP support tesla c2050 and quadro 6000.

I think quadro 6000 and tesla c2070 are very similar.

I want to use tesla c2070. Unfortunately, Dell and hp don't support tesla c2070.

Please let me know good choice for em simulation.

Hi HOHOH

I don't know if its correct but I think that quadro 6000 it's only for graphics calculation and not for CAD acceleration.
and only the tesla GPU is for CAD acceleration. that the reason that each CAD software
need driver written in CUDA software from NVIDIA. so for now the c2070
is new GPU and the driver is not ready yet. only the c2050 have it.

look at CUDA GPUs | NVIDIA Developer Zone
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top